Turbidity and Chlorine Meters

Tag Identification System means you can record the time and place for all samples!

Both of these EPA-compliant Meters use a tungsten light source for consistently reliable readings and feature an EPA compliance reading mode. The backlit LCD is easy to read. The light detector used for turbidity readings is a silicon photocell. Free and total chlorine readings are given by a silicon photocell with 525nm narrow band interference filters. Data you have logged can be downloaded through either the RS-232 or USB interfaces. Both Meters also make use of the Tag Identification System (TIS), which allows you to record the time and place at unlimited specific measurement locations. Just add iButton® tags near your sampling sites and then use the Meter to identify and authenticate logged data by touching the iButton to the connector on the Meter. Use the Windows® Software to sort or filter all collected data using different criteria—such as specific sampling location, parameter, date and time intervals or fixed range—to filter measured values. Data can be plotted in a graph, exported to other programs or printed.

Each Kit includes:

Five sample cuvets and caps

Three calibration cuvets for turbidimeter

Two calibration cuvets for colorimeter

Reagent powder packets for free and total chlorine

Silicone oil

Five tag holders with tags

Scissors

Four batteries

AC adaptor

Carrying case

Compliance: USEPA 180.1.