Single-Parameter Analyzers• No. 134981 has four programmable on/off relays—four for pH or ORP. One manual on/off relay for electrode wash. Simultaneously displays pH or ORP with temperature and relay status. Spade lug connector for pH or ORP. User-selectable ATC probe: Pt-1000, 10K thermistor or 3K Balco.
• No. 134975 offers five programmable on/off relays—four for pH, one for temperature. Simultaneously displays pH, temperature, relay status, electrode effiency and transmitter current mA output. Spade lug connector for pH.
• No. 134978 offers five programmable on/off relays—four for DO, one for temperature. User-selectable salinity and pressure compensated DO readings. Simultaneously displays DO, temperature, relay status and transmitter current mA output.
Analyzer Probes
• No. 134982 is self-cleaning and features a ceramic junction in a double-junction design. Design parameters are built in 10K thermistor automatic temperature compensation (ATC), 0-12 pH, 80ºC and 100-psi ratings. Body is ¾" MNPT submersible style.
• No. 134983 has the same features as No. 134982 for ORP measurement and has a platinum disk. Design parameters are 80ºC and 100 psi.
• No. 134984 is the same as No. 134982, except with all tinned leads.
• No. 134985 is made of heat treated 316 stainless steel, cell constant of K=1.0. 10K thermistor ATC. Design parameters are 0º-140ºC and 150 psi at 135ºC.
• No. 134986 has a ¾" MNPT submersible ABS body with 1mm-thin Teflon® membrane screw-on caps—easy to replace. Thermistor provides 10K ATC.
• No. 134987 is the same as No. 134986, except it has a stainless steel weighted body designed for field use.
Note: All Probes come with a 20'L cable. Field Probe cable is fully waterproof.
Multiparameter Analyzers
• No. 134977 has three programable on/off relays—two for conductivity, one for temperature. Accepts two- or four-wire conductivity cells for K=0.01, K=1 and K=10 cell constants for improved flexibility and accuracy. Simultaneously displays conductivity, temperature, cell constant, temperature coefficient, relay status, and transmitter current mA output.
• No. 134980 has five programmable on/off relays—two for pH, two for ORP and one for temperature. Displays absolute and relative ORP. Simultaneously displays pH, ORP, temperature, relay status and transmitter current mA output. Spade lug connector for pH and ORP.
• No. 134976 features five programmable on/off relays—four for ORP, one for temperature. Simultaneoulsy displays ORP, temperature, relay status, electrode efficiency and transmitter current mA output.
• No. 134979 has five programmable on/off relays—two pH, two DO, one temperature. User-selectable salinity and pressure compensated DO readings. Simultaneously displays pH, DO, temperature, relay status and transmitter current mA output. One-point calibration for DO readings. Spade lug connector for pH.
*Limited quantities available. Prices good while supplies last. No backorders accepted. Special prices not valid with any other discount. All sales are final.
;)
