BEN MEADOWS® Stream and Staff Gauges

Ben Meadows stream gauges are made from highly durable materials.

Each gauge consists of an iron frame coated with backed enamel to resist corrosion and discoloration. These instruments can even be used in salt water. Four standard styles are available. Each section is accurately graduated and provided with grommeted holes for fastening with a number 8 x 3/4" round head, brass-wood screw.

Style A—4" wide, marked at every foot, tenth and 0.02 ft. with total elevation. Available in 3-1/3 foot sections for numbering to 13.33 feet.

Style C—2-1/2" wide, graduated to hundredths and marked every foot and every tenth. Numbered 3-1/3 foot sections are available to 20 feet.

Style M—Metric gauge, 65mm wide. Divides into centimeters with each decimeter numbered. Gauges for any elevation may be assembled by using separate figure plates.

Style E—Unnumbered, 3-1/2" wide, graduated in feet and tenths. Separate figures are fastened on a plank, wall or pier to number any elevation desired.