Applications
Accurate testing of water in the field for on-site analysis and screening, testing of water in plants for monitoring and quality control, and spot checking of laboratory results and procedures. Appropriate when quick and relatively accurate results are needed.
Features & Construction
High impact plastic houses an LCD display with large easy to read numbers. Determines the concentrations of compounds by measuring the light reflected from two reaction zones on a test strip. The measurements from the two zones are averaged to produce a more accurate final result. Has a built in bar code reader to read the test and calibration strips and only four buttons for ease of operation. Self contained and portable, it will store up to 50 test results and up to five test methods. Auto off after two minutes when no key has been pressed, automatic self-diagnostic when switched on. Also displays time and date.
Use & Operation
Unit can be calibrated before use by means of the calibration bar code and strip: merely insert the barcode and CAL is displayed, then insert the calibration strip and press the start button upon which CAL disappears and the unit is calibrated. Basic measurement is performed by inserting a barcode for that test into the meter or by selecting a method which has already been entered (holds five). Dip the test strip into the sample and simultaneously press the Start button. Remove the test strip and wait for the meter to count down 60 sec. (it will beep at the end). Insert the strip into the meter's measurement chamber and the result will be displayed momentarily and stored in sequence automatically, along with the time and date. When the memory is full the oldest results are overwritten by the most recent test results. The test results can be viewed by scrolling through the memory. Data transfer to a PC can be accomplished using a special interface cable and software program.
Related Products & Accessories
Test strips (50) as listed in catalog and on the accompanying list, along with accessories and replacement parts. The EM Quant test strips are also available but are much less accurate. They are less expensive in the short run as no meter is required to read them.
Additional Information
When the low battery symbol appears, the meter will perform about 20 more tests after which the unit cannot be switched on. The meter cannot be calibrated when the battery is low. Batteries will last for about 1000 measurements. If the unit proves to be defective within the warranty period the manufacturer will exchange the instrument immediately.
Common Questions
Specifications
FREE Technical Support If you have specific questions on product specifications, product applications or installation, personal safety gear, regulatory compliance requirements, or any other technical questions E-mail our Product Pros staff. Or, call 800-241-6401 or 608-743-8001 from 7 a.m. to 7 p.m. CT, Monday--Friday.
FREE Catalog Thousands of outdoor professionals rely on Ben Meadows catalogs to bring them the quality equipment they depend upon to do their jobs. You can have your own copy of this invaluable resource sent directly to you, order your Free copy today and you will receive your new catalog featuring dependable, professional-grade outdoor tools and equipment, in about 3-5 business days. Click here and fill out a request form on-line.
Please Note: The information contained in this publication is intended for general information purposes only. This publication is not a substitute for review of the applicable government regulations and standards, and should not be construed as legal advice or opinion. Readers with specific questions should refer to the cited regulation or consult with an attorney.
© 2012 GHC Specialty Brands, LLC. Reference Number: WB0000
