Introduction Night vision products are comprised of image intensifier tubes and optics that amplify existing light to allow a person to see in conditions that are too dark for the naked eye. All night vision products work on the principle of collecting light energy (photons), converting that energy into electrical energy (electrons), multiplying this electrical energy and converting it back to light when the electrons strike a phosphor screen much like a television.
Applications for night vision include:
Night Vision Generations The term “generation” refers to a major advancement in technology regarding image quality and tube life.
Generation 0 technology, while impressive in its time as the first night vision equipment, depended on an infrared light source to supplement available light to produce an image. These images were fuzzy and distorted and range was limited by the strength of the infrared source. The tube, which is the heart of any night vision system, generally lasted only a few hundred hours of use.
Generation 1 devices use improved electronics to produce an image without the need for an external light source, but image quality and tube life are still low. Generation 1 technology is found in most “starlight” or “moonlight” devices.
Generation 2 marked a major improvement by introducing the micro-channel plate (MCP). The MCP is a glass disk with millions of microscopic holes to multiply and channel the electrons before they reach the phosphor screen. Light amplification for Generation 2 devices is typically 30,000 times.
Advanced Night Vision is not a separate generation, but rather a separate technology advanced by Bushnell that is comparable to Generation 2. Instead of using a micro-channel plate, fiber optic bundles eliminate distortion and noise to produce a highresolution image.
Generation 3 is even more sensitive by using gallium arsenide (GaAs) in the photocathode. This is the component responsible for converting photons to electrons, and the GaAs creates significantly more photoelectrons than with Generation 2. Light amplification for Generation 3 devices is typically 50,000 times.
Terminology
Angle or Field of View – The widest dimension of the circular viewing area seen through the device, often expressed in feet at 1000 yards distance. Bright Source – A bright source is an electronic circuit that turns the power down or off when exposed to light, thereby protecting the image intensifier. Eyepiece focus – The focus used to match a night vision device to a person’s specific eyesight. Intensifier Tube – These tubes amplify light to present a usable image. Objective Lens – Collects available light and focuses it on the image intensifier, along with providing magnification. Phosphor Screen – A green screen located at the back of the intensifier tube. The phosphor screen makes the image become visible. Photocathode – This component converts the photon energy into electrons to be amplified in the intensifier tube.
Care and Maintenance The most important point is to keep the device off in the light. Exposure to bright light can damage the components, and reduce the life span of those devices featuring a bright source protection. Though designed for use at night when humidity and dampness can be high, exposure to rain, fog or extended periods of high humidity can also damage these devices. Lenses should be cleaned similarly to those of a camera, and can easily be scratched if abrasive material is used. Cool, dry places are best for long-term storage.
Commonly Asked Questions
Sources for More Information
http://www.ittnv.com/ http://www.nightowloptics.com/ http://www.bushnell.com
FREE Technical Support If you have specific questions on product specifications, product applications or installation, personal safety gear, regulatory compliance requirements, or any other technical questions E-mail our Product Pros staff. Or, call 800-241-6401 or 608-743-8001 from 7 a.m. to 7 p.m. CT, Monday—Friday.
FREE Catalog Thousands of outdoor professionals rely on Ben Meadows Company catalogs to bring them the quality equipment they depend upon to do their jobs. You can have your own copy of this invaluable resource sent directly to you, order your Free copy today and you will receive your new catalog featuring dependable, professional-grade outdoor tools and equipment, in about 3-5 business days. Click here and fill out a request form on-line.
© 2012 GHC Specialty Brands, LLC. Reference Number: WB0000
