- Benchtop pH / ISE Meter is rated IP54 splashproof and dustproof
- Eliminate stir plates and bars with optional Stirrer
Features pH and ISE modes. ISE mode reads in M, mg/L, ppb, percent or no units. Stores up to 10 password-protected methods so you can easily retrieve operation procedures. Displays pH or ISE and temperature simultaneously. Stores last 10 calibrations and up to 750 datalogging points by time, stability or manual read, all with time/date stamp. Ability to turn off data log and operate an autosampler. Improved stability algorithm increases calibration and measurement accuracy. Average slope and slope of segment printed with measurement. ATC temperature calibration. Individual method passwords.
Orion 4-Star Plus Benchtop pH / ISE Meter (No. 135070) runs on four AA batteries, sold separately, or with a universal power adaptor. RS-232 port for data downloads and meter updates. Optional
Stirrer (No. 135076) connects to the Meter to keep your sample homogenized, eliminating the need for a stir plate and stir bar.
Benchtop pH / ISE Meter Kit (No. 135069) includes the Meter, pH electrode, ATC probe, buffers and benchtop electrode stand. Made in the USA.
Replacement ATC Probe (No. 135072) transmits a signal to the pH meter, which automatically corrects pH measurements for variations in electrode slope due to temperature change. The epoxy body ATC probe is not recommended for use in organic solvents, but may be used on an intermittent basis in methanol or ethanol.
Compliance: CE, CSA approved. UL listed. IP54 rated.
View Larger
