NORWELL® PTFE Resin Bailer Components

Bailer Components Combine to Build Your PTFE Resin Bailer or Replace Individual Parts

Individual PTFE Resin Bailer Components go together to create your PTFE Resin Bailer.
For a complete Bailer, select a top, body and bottom with the same diameter. Bailers are available in 3/4", 1" and 1-7/8" diameters. All parts sold separately.
A. QUICK CONNECT™ Attach and detach suspension cords quickly and easily. Designed for Norwell PTFE Resin bailers, the Quick Connect allows you to attach and detach cables and bailers with a simple nut style connection. The connector is made of 100% fluoropolymer resin and the nut is made of mechanically strong Tefzel®. Can be dedicated to a specific well and virtually eliminates the possibility of a knot releasing and dropping the bailer down the well.
B. STANDARD TOP: "V" notched opening for easy pouring.
C. POINT SAMPLING TOP: Enables you to take a sample at a specific depth. Similar to Standard Top, but features an added check valve that closes during sample retrieval.
D. BAILER BODIES: Virtually any combination can be put together to increase capacity. Translucent body for viewing sample taken. 1-7/8" O.D. available for use in wells 2" I.D. or larger.
E. EXTENSION COUPLING: For joining bailer bodies to increase capacity.
F. STANDARD BOTTOM: Precision ground check valve stays confined to bottom section, preventing loss of sampled material.
G. CONTROL FLOW BOTTOM: Controls flow release rate of samples taken to minimize agitation.
H. BOTTOM EMPTYING DEVICE: Used for rapid purging of a well. Check valve opens when plunger contacts sample vessel.