HANNA® Turbidity and Chlorine Meters

Turbidity and Chlorine Meters Feature Tag Identification Systems so You Can Record the Time and Place for All Samples

EPA-compliant Turbidity and Chlorine Meters use a tungsten light source for consistently reliable readings and feature an EPA compliance reading mode. The backlit LCD is easy to read. The light detector used for turbidity readings is a silicon photocell. Free and total chlorine readings are given by a silicon photocell with 525nm narrow band interference filters. Data you have logged can be downloaded through either the RS-232 or USB interfaces.
Both Meters also make use of the Tag Identification System (TIS), which allows you to record the time and place at unlimited specific measurement locations. Just add iButton® tags near your sampling sites and then use the Meter to identify and authenticate logged data by touching the iButton to the connector on the Meter.
Turbidity Meter Kit (No. 143430) and Turbidity and Chlorine Meter Kit (No. 143431) both include five sample cuvettes and caps, three calibration cuvettes for turbidimeter, two calibration cuvettes for colorimeter, reagent powder packets for free and total chlorine, silicone oil, five tag holders with tags, scissors, four batteries, AC adaptor and carrying case.
Replacement Cuvettes (No. 143433), Tag Holders with Tags (No. 143435), Free Chlorine Reagent (No. 143436) and Free/Total Chlorine Reagent (No. 143437) also available.
Compliance: USEPA 180.1.