HANNA® Multiparameter Water Quality Meters

Water Quality Meters Have Intuitive Configuration and Calibration for Ease of Use

Rugged HANNA Mutiparameter Water Quality Meters include a 4m (No. 138636) or 10m (No. 138637) cable so you can drop the probe down 2"-dia. wells, off boats or off bridges. The iButton® tag identification system makes test logging easier. Just place a tag with a unique ID at a specific location. When you return to take a measurement, just touch Meter to the tag and it labels all data with that location’s ID.
Meters feature quick calibration, built-in barometer, measurement check, automatic recognition of pH/ORP probe and USB connectivity. Use it for on-demand or automatic logging of up to 60,000 samples with 13 measurements each. Logging interval can be set for one second to three hours.
GPS-Enabled (Nos. 158778 and 158779) model adds an internal 12-channel GPS receiver and antenna that lets you add location data to your measurements. Logged data is embedded with GPS coordinates. This function is accurate to within 30' so you can return to the same location for repeated measurements. GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also shows your signal strength and the number of satellites.
All Meters Include probe, calibration solution, Probe Maintenance Kit (No. 138638), four rechargeable NiMH batteries, power adaptor and cable, vehicle 12V outlet adaptor, five iButtons with holder, USB cable, Windows®-compatible software, instruction manual and carrying case. A Flow Cell (No. 138639) is availble for measuring samples with continuous flow.
Compliance: Meter: IP67 rated. Probe: IP68 rated.